Mermaid's Tale Metallic Teal HTPLA

Metallic Team PLA Filament

$4.00 USD

Any good story of the sea comes with a bit of embellishment, but this material needs not embellishing. Our 2nd material, following Galactic Empire Metallic Purple, designed in collaboration with local artist, Rose "Maz" Moore of the creative duo "Maz and Attero" (etsy.com/shop/mazandattero or mazandattero.xyz) and, yet again named by the community, Mermaid's Tale Metallic Teal HTPLA  captures the shimmer and shine of the sea. It reminds me of scales on a fish, the sun-lit ocean waves, and hand airbrushed fishing lures my neighbor made growing up. Equaled only by Cupid's Crush Metallic Pink in level of sparkle, this Metallic Teal is spectacular!

Technical Data Sheets

All of our products have material technical data sheets available for download here

Safety Data Sheets

All of our products have safety data sheets available for download here

Shipping

We provide a number of domestic shipping options within the United States via UPS, including free shipping on orders of $50 or more. We also provide international shipping via DHL Express.

Returns

At ProtoPlant's discretion, returns and replacements will be accepted within 90 days of purchase.  Please check the material label before opening your product.  Only sealed product can be returned. Shipping of items for exchange or refund is paid by the customer. More information about returns and replacements can be found in our terms and conditions

Get lured in with the tale of a filament fit for a Mermaid's tail! 


Print with ease

Print with the ease of standard PLA with standard hardware and temperatures, but make fun, mesmerizing prints that stand out. Celebrate good times by printing toys, treasures, and keepsakes. If you want to make a print more fun, just add some metallic pop! Our metallic finish contains no actual metal and has little risk of clogging or wearing your nozzle, and it won't make a glitter mess, but beware the printing is sure to be addictive!  Metallic particles are relatively small but have some orientation effects, giving top/bottom surfaces more shine than sidewall, so have some fun playing with orientation to see how the result changes! We recommend 0.2 mm layers for the best result.

Heat treating

Like our other HTPLAs, Metallic HTPLA can be "Heat Treated"  to increase crystallinity for "Higher Temperature" resistance compared to amorphous PLA, ABS, and co-polyesters like PETG!  Glittler Flake HTPLA prints translucence, but turns opaque when heat treated (or crystallized).  With a more crystalline structure, heat treated HTPLA parts can hold form to near melting, though temperatures where the material is practically useful vary greatly depending on geometry and load conditions!

Improved performance

For this improved the performance, your prints should be baked in an oven until you see a change from translucent to opaque with reduced gloss. This visual change indicating the improved performance! We've  seen the change take place in 5-10 minutes on thin walled parts but can take an hour or more. We've had good luck in a quality, at home convection oven at 110C (225F).  Parts will get very "floppy" before becoming more firm, so please leave supports on your parts or support them and bake them on a flat, non-radiating surface (like glass, ceramic, or composite).

  • Available in 1.75 & 2.85 (3) mm diameter on a 500g diameter recyclable cardboard spool
  • Usable on most PLA-compatible printers, such as Lulzbot, Makerbot, FlashForge, Dremel, Ultimaker, Printrbot, and more!


No abrasive fillers so expect normal wear with standard nozzles.

In our experience, good results were achieved using standard PLA parameters ranging from 195-225C nozzle with standard build surface preparation (blue tape, glue stick, or BuildTak). No heated bed required but up to 60C is okay.  Beware, if the bed temperature is too high, your part base could actually heat treat while printing, increasing warping and decreasing adhesion.  Some shrinkage will occur in the heat treating process, so dimension critical parts may need to be scaled appropriately (as much as 2.5% in our experience).

Customer Reviews
4.9 Based on 12 Reviews
Write a Review
Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
JG
07/19/2020
Julie G.
United States United States
I am enamored of this filament!

It is the perfect shade of teal and sparkles beautifully. I was wanting an intermediate shade of filament between blue and green, and this is even better than I hoped for. Definitely planning to buy more when this spool runs out!

LM
07/17/2020
Lauren M.
United States United States
Stunning teal with beautiful shimmer

Dark teals are my favorite colors. The glitter is perfect, and it printed like a dream. Please don't stop making this filament!

ML
03/18/2019
Mia L.
Magic

This is my fav protopasta filament so far. It's color and sparkle take me to a happy place and look really good with my custom sculpture. I absolutely don't want to do any post processing with the lovely surface after printing. Layers more or less disappear at .14mm layer height. I have a more in depth review and suggestion for this filament class under the Metallic Espresso.

W
02/18/2019
William
Great Filament

I just got my 3D printer this weekend and my girlfriend and I went to Microcenter to take a look at the filaments on sale. We saw this one and she really wanted me to print with it. So I bought it and so far have only printed Benchy Boat and the owl pair but the quality is amazing and it looks damn good. Highly recommend it.

JM
11/07/2018
Jeromie M.
United States
Stellar filament from a stellar company

I've ordered this filament a few times and it's always a pleasure to print. However, my most recent order arrived and basically fell apart as I pulled it out of the vacuum sealed bag. I notified the Proto Pasta team via email and they were generous enough to send a replacement. When the replacement arrived, it had the same problem. I sent a follow up email to let the know of the issue again and asked that they not send me a replacement cause I could make due with what I already had from the original order and the follow on replacement. But being the great people that they are over at Proto Pasta, they insisted they send me another replacement. This time arriving with no issues. Cannot recommend this filament and company enough.

Free Domestic Shipping

Free shipping in the lower 48 + DC for orders over $49.

International Shipping

Live outside the U.S.? We ship all over the world!

Support from the Source

Get expert, in-house support by the makers of Protopasta.