Tangerine Orange Metallic Gold HTPLA

Metallic Orange PLA Filament

$4.00 USD

Special thanks to Thomas Sanladerer (toms3d.org) for visiting Protoplant and participating in the design and manufacture of his very own Protopasta color, Tangerine Orange Metallic (TOM) Gold HTPLA . Inspired by wild, dynamic colors like those made popular by Lotus Cars, this color dynamically shifts in the light from gold to orange. We hope sharing the process of making and the resulting one-of-a-kind product inspires you to print beautiful, cherished things!

Technical Data Sheets

All of our products have material technical data sheets available for download here

Safety Data Sheets

All of our products have safety data sheets available for download here.

Shipping

We provide a number of domestic shipping options within the United States via UPS, including free shipping on orders of $50 or more. We also provide international shipping via DHL Express.

Returns

At ProtoPlant's discretion, returns and replacements will be accepted within 90 days of purchase.  Please check the material label before opening your product.  Only sealed product can be returned. Shipping of items for exchange or refund is paid by the customer. More information about returns and replacements can be found in our terms and conditions

An exotic, automotive-inspired filament designed together with TOM!


Print with the ease of standard PLA with standard hardware and temperatures, but make fun, mesmerizing prints that stand out.  Celebrate good times by printing toys, treasures, and keepsakes.  If you want to make a print more fun, just add some metallic pop!  Our metallic finish contains no actual metal and has little risk of clogging or wearing your nozzle, and it won't make a glitter mess, but beware the printing is sure to be addictive!  Metallic particles are relatively small but have some orientation effects, giving top/bottom surfaces more shine than sidewall, so have some fun playing with orientation to see how the result changes!  We recommend 0.2 mm layers for the best result.

Like our other HTPLAs, Metallic HTPLA can be "Heat Treated"  to increase crystallinity for "Higher Temperature" resistance compared to amorphous PLA, ABS, and co-polyesters like PETG!  Glittler Flake HTPLA prints translucence, but turns opaque when heat treated (or crystallized).  With a more crystalline structure, heat treated HTPLA parts can hold form to near melting, though temperatures where the material is practically useful vary greatly depending on geometry and load conditions!

For this improved the performance, your prints should be baked in an oven until you see a change from translucent to opaque with reduced gloss.  This visual change indicating the improved performance! We've  seen the change take place in 5-10 minutes on thin walled parts but can take an hour or more.  We've had good luck in a quality, at home convection oven at 110C (225F).  Parts will get very "floppy" before becoming more firm, so please leave supports on your parts or support them and bake them on a flat, non-radiating surface (like glass, ceramic, or composite).

  • Available in 1.75 & 2.85 (3) mm diameter on a 500g diameter recyclable cardboard spool
  • Usable on most PLA-compatible printers, such as Lulzbot, Makerbot, FlashForge, Dremel, Ultimaker, Printrbot, and more!

No abrasive fillers so expect normal wear with standard nozzles.

In our experience, good results were achieved using standard PLA parameters ranging from 195-225C nozzle with standard build surface preparation (blue tape, glue stick, or BuildTak). No heated bed required but up to 60C is okay.  Beware, if the bed temperature is too high, your part base could actually heat treat while printing, increasing warping and decreasing adhesion.  Some shrinkage will occur in the heat treating process, so dimension critical parts may need to be scaled appropriately (as much as 2.5% in our experience).

Customer Reviews
4.9 Based on 14 Reviews
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
AC
03/06/2020
Alexis C.
United States United States
Great color

Nice orange

A ProtoPlant, makers of Proto-pasta Customer
JS
10/21/2019
James S.
United States United States
Perfect for Halloween.

Got this for some upcoming Halloween projects. It’s the perfect color for printing pumpkins! Of course, it prints like butter like all Proto Pasta does.

James S. verified customer review of Tangerine Orange Metallic Gold HTPLAJames S. verified customer review of Tangerine Orange Metallic Gold HTPLAJames S. verified customer review of Tangerine Orange Metallic Gold HTPLA
AS
05/06/2019
Andrew S.
United States
Great filament

Very nice filament, great unique color and prints well. Would definitely buy again. Thanks!

Andrew S. verified customer review of Tangerine Orange Metallic Gold HTPLA
RR
04/29/2019
Randy R.
United States
Excellent Product

I've been using lots of Proto-Pasta for a while, and each color adds some nice character to my prints. The print quality is amazing.

BT
01/25/2019
Ben T.
United States
Great Filament

I’m very pleased with this filament. It extruded very cleanly, stuck to the bed as expected, and has a very nice color to it. I would definitely recomend this filament, or any protopasta filament, to anybody interested.

Ben T. verified customer review of Tangerine Orange Metallic Gold HTPLABen T. verified customer review of Tangerine Orange Metallic Gold HTPLABen T. verified customer review of Tangerine Orange Metallic Gold HTPLA

Free Domestic Shipping

Free shipping in the lower 48 + DC for orders over $49.

International Shipping

Live outside the U.S.? We ship all over the world!

Support from the Source

Get expert, in-house support by the makers of Protopasta.