Winter Blue Glitter Flake HTPLA

Metallic Blue PLA Filament

$5.00 USD
HTGL170-WTB

Introducing a special, seasonal release: Winter Blue Glitter Flake.  Born out of Project Winterfill, the idea was to capture the spirit of the approaching season in filament form.  Created from our highest quality, translucent HTPLA v2, we carefully introduce just the right amount of blue pigment and sparkle for a cool, wintry blue.  A very dynamic and deep color, the blue concentration creates a light blue color that can extend both towards a silvery green and a deep dark purple depending on form and light.  The additional glitter bits sometimes disappear and in other light bring a frosty finish which make the blue look almost snow-covered.  Having been developed in October, we had fun printing some wrinkly pumpkins to experience to experience the rich beauty of this dynamic color.  Please enjoy creating festive holiday prints and spread good cheer with Proto-pasta's Winter Blue!

Technical Data Sheets

Technical data sheets available for download here

Safety Data Sheets

Safety data sheets available for download here.

Shipping

We provide a number of domestic shipping options within the United States via UPS, including free shipping on orders of $50 or more. We also provide international shipping via DHL Express.

Returns

At ProtoPlant's discretion, returns and replacements will be accepted within 90 days of purchase.  Please check the material label before opening your product.  Only sealed product can be returned. Shipping of items for exchange or refund is paid by the customer. More information about returns and replacements can be found in our terms and conditions



Prop 65: This product contains a chemical, Titanium Dioxide, which is known to the State of CA to cause cancer when unbound particles are inhaled.

Translucent blue that's sparkly too for frosty winter fun!

Print with the ease of standard PLA with standard hardware and temperatures, but make fun, mesmerizing prints that stand out. Celebrate good times by printing ornaments, toys, and treasures. If you want to make a print more fun, just add glitter. Glitter Flake has little risk of clogging or wearing your nozzle, and it won't make a glitter mess, but beware, printing with glitter is sure to be addictive! Glitter particles are relatively small but have some orientation effects, giving top/bottom surfaces more shine than sidewall, so have some fun playing with orientation to see how the result changes!

Like our other HTPLAs, Glitter Flake HTPLA can be "Heat Treated" to increase crystallinity for "Higher Temperature" resistance compared to amorphous PLA, ABS, and co-polyesters like PETG! Glittler Flake HTPLA prints translucence, but turns opaque when heat treated (or crystallized). With a more crystalline structure, heat treated HTPLA parts can hold form to near melting, though temperatures where the material is practically useful vary greatly depending on geometry and load conditions!

For this improved the performance, your prints should be baked in an oven until you see a change from translucent to opaque with reduced gloss. This visual change indicating the improved performance! We've seen the change take place in 5-10 minutes on thin walled parts but can take an hour or more. We've had good luck in a quality, at home convection oven at 110C (225F). Parts will get very "floppy" before becoming more firm, so please leave supports on your parts or support them and bake them on a flat, non-radiating surface (like glass, ceramic, or composite).

  • Available in 1.75 & 2.85 (3) mm diameter on a 500g diameter recyclable cardboard spool
  • Usable on most PLA-compatible printers, such as Lulzbot, Makerbot, FlashForge, Dremel, Ultimaker, Printrbot, and more!

No abrasive fillers so expect normal wear with standard nozzles.

In our experience, good results were achieved using standard PLA parameters ranging from 190-230C nozzle with standard build surface preparation (blue tape, glue stick, or BuildTak). No heated bed required but up to 70C okay. Some shrinkage will occur in the heat treating process, so dimension critical parts may need to be scaled appropriately (as much as 2.5% in our experience).


Customer Reviews
4.6 Based on 17 Reviews
5 ★
88% 
15
4 ★
0% 
0
3 ★
6% 
1
2 ★
0% 
0
1 ★
6% 
1
Customer Photos
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
JB
11/21/2023
Justin B.
United States United States
I recommend this product

Great Product.... Decent price

This filament runs very well on Prusa MK3/MK4's however its a bit pricey...

Protopasta, Filament by Protoplant Winter Blue Glitter Flake HTPLA Review
03/12/2024

Protopasta, Filament by Protoplant

So glad you like it! I hope you printed many beautiful things!!!

JD
01/21/2022
Jason D.
United States United States
I recommend this product

Great product!

This material prints well, and is on a cardboard spool which is better for the environment. I just wish they offered more colors in 2.85mm size, I would buy a lot more!

Protopasta, Filament by Protoplant Winter Blue Glitter Flake HTPLA Review
A
09/20/2021
Anglesmith_Customs
United States United States
I recommend this product

It’s just a happy color

Prints great! Love making my keychains with it.

Protopasta, Filament by Protoplant Winter Blue Glitter Flake HTPLA Review
TW
06/23/2021
Trent W.
United States United States

Awesome Product

Worked exactly how I wanted. Got some clear ice and translucent blue and they both worked better than I expected. Light shines through amazing and print quality was great from the beginning!!!

RM
05/17/2021
Rex M.
United States United States

Great product

Has beautiful color and prints great

Free Domestic Shipping

Free shipping in the lower 48 + DC over $49.

International Shipping

Live outside the U.S.? We ship all over the world!

Support from the Source

Expert, in-house support from Protopasta makers.