Tom's Tangerine Orange Metallic Gold HTPLA

Metallic Orange PLA Filament

$5.00 USD
HTPM170-TOM

Special thanks to Thomas Sanladerer (toms3d.org) for visiting Protoplant and participating in the design and manufacture of his very own Protopasta color, Tangerine Orange Metallic (TOM) Gold HTPLA . Inspired by wild, dynamic colors like those made popular by Lotus Cars, this color dynamically shifts in the light from gold to orange. We hope sharing the process of making and the resulting one-of-a-kind product inspires you to print beautiful, cherished things!

Technical Data Sheets

Technical data sheets available for download here

Safety Data Sheets

Safety data sheets available for download here.

Shipping

We provide a number of domestic shipping options within the United States via UPS, including free shipping on orders of $50 or more. We also provide international shipping via DHL Express.

Returns

At ProtoPlant's discretion, returns and replacements will be accepted within 90 days of purchase.  Please check the material label before opening your product.  Only sealed product can be returned. Shipping of items for exchange or refund is paid by the customer. More information about returns and replacements can be found in our terms and conditions



Prop 65: This product contains a chemical, Titanium Dioxide, which is known to the State of CA to cause cancer when unbound particles are inhaled.

An exotic, automotive-inspired filament designed together with TOM!


Print with the ease of standard PLA with standard hardware and temperatures, but make fun, mesmerizing prints that stand out.  Celebrate good times by printing toys, treasures, and keepsakes.  If you want to make a print more fun, just add some metallic pop!  Our metallic finish contains no actual metal and has little risk of clogging or wearing your nozzle, and it won't make a glitter mess, but beware the printing is sure to be addictive!  Metallic particles are relatively small but have some orientation effects, giving top/bottom surfaces more shine than sidewall, so have some fun playing with orientation to see how the result changes!  We recommend 0.2 mm layers for the best result.

Like our other HTPLAs, Metallic HTPLA can be "Heat Treated"  to increase crystallinity for "Higher Temperature" resistance compared to amorphous PLA, ABS, and co-polyesters like PETG!  Glittler Flake HTPLA prints translucence, but turns opaque when heat treated (or crystallized).  With a more crystalline structure, heat treated HTPLA parts can hold form to near melting, though temperatures where the material is practically useful vary greatly depending on geometry and load conditions!

For this improved the performance, your prints should be baked in an oven until you see a change from translucent to opaque with reduced gloss.  This visual change indicating the improved performance! We've  seen the change take place in 5-10 minutes on thin walled parts but can take an hour or more.  We've had good luck in a quality, at home convection oven at 110C (225F).  Parts will get very "floppy" before becoming more firm, so please leave supports on your parts or support them and bake them on a flat, non-radiating surface (like glass, ceramic, or composite).

  • Available in 1.75 & 2.85 (3) mm diameter on a 500g diameter recyclable cardboard spool
  • Usable on most PLA-compatible printers, such as Lulzbot, Makerbot, FlashForge, Dremel, Ultimaker, Printrbot, and more!

No abrasive fillers so expect normal wear with standard nozzles.

In our experience, good results were achieved using standard PLA parameters ranging from 195-225C nozzle with standard build surface preparation (blue tape, glue stick, or BuildTak). No heated bed required but up to 60C is okay.  Beware, if the bed temperature is too high, your part base could actually heat treat while printing, increasing warping and decreasing adhesion.  Some shrinkage will occur in the heat treating process, so dimension critical parts may need to be scaled appropriately (as much as 2.5% in our experience).


Customer Reviews
4.9 Based on 21 Reviews
5 ★
90% 
19
4 ★
5% 
1
3 ★
5% 
1
2 ★
0% 
0
1 ★
0% 
0
Customer Photos
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
JA
10/17/2022
Jeremy A.
United States United States

Pristine color

Has beef vary consistent so much so I use a hood roll on one project

Protopasta, Filament by Protoplant Tangerine Orange Metallic Gold HTPLA Review
11/11/2022

Protopasta, Filament by Protoplant

Thanks & enjoy!

WW
05/12/2022
Winston W.
United States United States

The Orange We deserve

Not originally the Orange I wanted but it was still beautiful once printed out and it looks amazing on the Foam Dart Blaster I made from it.

BE
09/22/2021
Bill E.
United States United States
I recommend this product

Awesome quality, super cool finish!

Used on my Prusa Mini+ w/Bondtech Heatbreak, works super well. Loving these results!

A Protopasta, Filament by Protoplant Customer
KR
08/30/2021
Karl R.
United States United States

Strong, low strings, looks awesome

Switching to filament with a decorative finish often means futzing about with test prints to find the right temperature/speed/etc balance, but this worked straight out of the box. One thing I noticed is that it doesn't photograph as well as it looks, but in person it looks soooooo good.

IQ
06/28/2021
Ian Q.
United States United States

My favorite go to filament

Joel’s high five blue is one of favorite filaments for most of my builds. This is my third purchase of this filament, I have had zero issues with it in my flash forge adventurer 3 printer. Proto-pasta is my go to brand for all my 3D printing needs

Free Domestic Shipping

Free shipping in the lower 48 + DC over $49.

International Shipping

Live outside the U.S.? We ship all over the world!

Support from the Source

Expert, in-house support from Protopasta makers.